E.U. CHEMICAL ENGINEERING DEPARTMENT STUDENT LABORATORIES
Student Laboratory-1(Pilot Plants)
Chemical Engineering Laboratory-I ChE 310:
E - Practical Aspects of Electricity
C1 - Physical and Chemical Equilibrium
C2 - Determination of Physical and Transport Properties
F1 - Steady Current from Pipes
F2 - H-Q Characteristics of Centrifugal Pump
F3 - Fluidization
F4 - Flow Through Packed Columns
F5- Size Reduction (Grinding and Sieve Analysis)
H1 - Heat Transfer by Conduction and Forced Convection
H2 - Unsteady Heat Transfer to Batch Liquid in Agitated Tank
H3 - Refrigeration Cycle
H4 - Plate Type Heat Exchanger
M - Determination of the Vapor-Liquid Equilibrium
.jpg)
.jpg)
Chemical Engineering Laboratory-II ChE 403:
H1 - Cooling Tower
H2 - Drying in Tray Dryer
H3 - Climbing Film Evaporator
H4 - Spray Dryer
M1 - Gas Absorption
M2 - Distillation
M3 - Extraction
M4 - Water Softening Using Ion Exchange Method
M5 - Chemical Absorption of Carbondioxide from Air
R1 - Liquid Phase Chemical Reactor
R2 - Homogeneous Reactor
R3 - Tubular Flow Reactor
T - Production of Ammonium Sulfate From Gypsum
Student Laboratory-3:
Chemical Engineering Laboratory-I ve II (KMS 310-403):
* System Analysis (Temparature Control-1 ve 2) (P1)
* System Analysis (Level Control-1 ve 2) (P2)
Student Laboratory-2 (Chemistry and Instrumental Analysis Laboratory):
* Chemistry Laboratory (ChE 212).
* Instrumental Analysis Laboratory (ChE 307).
.jpg)
.jpg)
Chemistry (ChE 212) and Instrumental Analysis (ChE 307) Laboratory courses are given in this laboratory alternately according to their semesters. In addition, the process control experiments of the Chemical Engineering laboratory (ChE 310 - ChE403) are also performed here. Level, flow, pressure control test equipment, process control test set, flue gas analyzer, melting point detector, conductometer, refractometer, viscometer, pH meter, vacuum pump, oven, heater and mixers, autoclave, compressor, UV lamp, precision scales, etc. devices are available.
Computer Laboratory:
.jpg)
The Windows 7 operating system is installed in a laboratory with a total of 48 computers equipped with programs such as: Office 2010, MatLAB 2012, Aspen Plus 2004.1 and AutoCAD 2014, Bricsnet IntelliCAD 2000 V.2.2. The Basic Skills in Computer (ChE 107), Computer Programming (ChE 112), Technical Drawing (ChE 110), and Mathematics IV (ChE 202) all applications are performed in this laboratory.
